std::equal

Defined in header `<algorithm>`
	(1)
template< class InputIt1, class InputIt2 > bool equal( InputIt1 first1, InputIt1 last1, InputIt2 first2 );			(until C++20)
template< class InputIt1, class InputIt2 > constexpr bool equal( InputIt1 first1, InputIt1 last1, InputIt2 first2 );			(since C++20)
template< class ExecutionPolicy, class ForwardIt1, class ForwardIt2 > bool equal( ExecutionPolicy&& policy, ForwardIt1 first1, ForwardIt1 last1, ForwardIt2 first2 );		(2)	(since C++17)
		(3)
template< class InputIt1, class InputIt2, class BinaryPredicate > bool equal( InputIt1 first1, InputIt1 last1, InputIt2 first2, BinaryPredicate p );				(until C++20)
template< class InputIt1, class InputIt2, class BinaryPredicate > constexpr bool equal( InputIt1 first1, InputIt1 last1, InputIt2 first2, BinaryPredicate p );				(since C++20)
template< class ExecutionPolicy, class ForwardIt1, class ForwardIt2, class BinaryPredicate > bool equal( ExecutionPolicy&& policy, ForwardIt1 first1, ForwardIt1 last1, ForwardIt2 first2, BinaryPredicate p );			(4)	(since C++17)
			(5)
template< class InputIt1, class InputIt2 > bool equal( InputIt1 first1, InputIt1 last1, InputIt2 first2, InputIt2 last2 );					(since C++14) (until C++20)
template< class InputIt1, class InputIt2 > constexpr bool equal( InputIt1 first1, InputIt1 last1, InputIt2 first2, InputIt2 last2 );					(since C++20)
template< class ExecutionPolicy, class ForwardIt1, class ForwardIt2 > bool equal( ExecutionPolicy&& policy, ForwardIt1 first1, ForwardIt1 last1, ForwardIt2 first2, ForwardIt2 last2 );				(6)	(since C++17)
				(7)
template< class InputIt1, class InputIt2, class BinaryPredicate > bool equal( InputIt1 first1, InputIt1 last1, InputIt2 first2, InputIt2 last2, BinaryPredicate p );						(since C++14) (until C++20)
template< class InputIt1, class InputIt2, class BinaryPredicate > constexpr bool equal( InputIt1 first1, InputIt1 last1, InputIt2 first2, InputIt2 last2, BinaryPredicate p );						(since C++20)
template< class ExecutionPolicy, class ForwardIt1, class ForwardIt2, class BinaryPredicate > bool equal( ExecutionPolicy&& policy, ForwardIt1 first1, ForwardIt1 last1, ForwardIt2 first2, ForwardIt2 last2, BinaryPredicate p );					(8)	(since C++17)

1,3) Returns true if the range [first1, last1) is equal to the range [first2, first2 + (last1 - first1)), and false otherwise.

5,7) Returns true if the range [first1, last1) is equal to the range [first2, last2), and false otherwise.

2,4,6,8) Same as (1,3,5,7), but executed according to policy. These overloads do not participate in overload resolution unless

std::is_execution_policy_v<std::decay_t<ExecutionPolicy>> is true.	(until C++20)
std::is_execution_policy_v<std::remove_cvref_t<ExecutionPolicy>> is true.	(since C++20)

Two ranges are considered equal if they have the same number of elements and, for every iterator i in the range [first1, last1), *i equals *(first2 + (i - first1)). The overloads (1,2,5,6) use operator== to determine if two elements are equal, whereas overloads (3,4,7,8) use the given binary predicate p.

Parameters

first1, last1	-	the first range of the elements to compare
first2, last2	-	the second range of the elements to compare
policy	-	the execution policy to use. See execution policy for details.
p	-	binary predicate which returns true if the elements should be treated as equal. The signature of the predicate function should be equivalent to the following: bool pred(const Type1 &a, const Type2 &b); While the signature does not need to have const &, the function must not modify the objects passed to it and must be able to accept all values of type (possibly const) `Type1` and `Type2` regardless of value category (thus, Type1 & is not allowed, nor is Type1 unless for `Type1` a move is equivalent to a copy (since C++11)). The types Type1 and Type2 must be such that objects of types InputIt1 and InputIt2 can be dereferenced and then implicitly converted to Type1 and Type2 respectively.
Type requirements
- `InputIt1, InputIt2` must meet the requirements of LegacyInputIterator.
- `ForwardIt1, ForwardIt2` must meet the requirements of LegacyForwardIterator.

Return value

5-8) If the length of the range [first1, last1) does not equal the length of the range [first2, last2), returns false.

If the elements in the two ranges are equal, returns true.

Otherwise returns false.

Notes

std::equal should not be used to compare the ranges formed by the iterators from std::unordered_set, std::unordered_multiset, std::unordered_map, or std::unordered_multimap because the order in which the elements are stored in those containers may be different even if the two containers store the same elements.

When comparing entire containers for equality, operator== for the corresponding container are usually preferred.

Complexity

1,3) At most last1 - first1 applications of the predicate

5,7) At most min(last1 - first1, last2 - first2) applications of the predicate.
However, if InputIt1 and InputIt2 meet the requirements of LegacyRandomAccessIterator and last1 - first1 != last2 - first2 then no applications of the predicate are made (size mismatch is detected without looking at any elements).

2,4,6,8) same, but the complexity is specified as O(x), rather than "at most x".

Exceptions

The overloads with a template parameter named ExecutionPolicy report errors as follows:

If execution of a function invoked as part of the algorithm throws an exception and ExecutionPolicy is one of the standard policies, std::terminate is called. For any other ExecutionPolicy, the behavior is implementation-defined.
If the algorithm fails to allocate memory, std::bad_alloc is thrown.

Possible implementation

equal (1)

template<class InputIt1, class InputIt2>
constexpr //< since C++20
bool equal(InputIt1 first1, InputIt1 last1, InputIt2 first2)
{
    for (; first1 != last1; ++first1, ++first2)
        if (!(*first1 == *first2))
            return false;
 
    return true;
}

equal (3)

template<class InputIt1, class InputIt2, class BinaryPredicate>
constexpr //< since C++20
bool equal(InputIt1 first1, InputIt1 last1,
           InputIt2 first2, BinaryPredicate p)
{
    for (; first1 != last1; ++first1, ++first2)
        if (!p(*first1, *first2))
            return false;
 
    return true;
}

Example

The following code uses std::equal to test if a string is a palindrome.

Run this code

#include <algorithm>
#include <iomanip>
#include <iostream>
#include <string_view>
 
constexpr bool is_palindrome(const std::string_view& s)
{
    return std::equal(s.cbegin(), s.cbegin() + s.size() / 2, s.crbegin());
}
 
void test(const std::string_view& s)
{
    std::cout << std::quoted(s)
              << (is_palindrome(s) ? " is" : " is not")
              << " a palindrome\n";
}
 
int main()
{
    test("radar");
    test("hello");
}

Output:

"radar" is a palindrome
"hello" is not a palindrome

Compiler support
Freestanding and hosted
Language
Standard library
Standard library headers
Named requirements
Feature test macros (C++20)
Language support library
Concepts library (C++20)
Metaprogramming library (C++11)
Diagnostics library
General utilities library
Strings library
Containers library
Iterators library
Ranges library (C++20)
Algorithms library
Numerics library
Localizations library
Input/output library
Filesystem library (C++17)
Regular expressions library (C++11)
Concurrency support library (C++11)
Technical specifications
Symbols index
External libraries

findfind_iffind_if_not (C++11)	finds the first element satisfying specific criteria (function template)
lexicographical_compare	returns true if one range is lexicographically less than another (function template)
mismatch	finds the first position where two ranges differ (function template)
search	searches for a range of elements (function template)
ranges::equal (C++20)	determines if two sets of elements are the same (niebloid)
equal_to	function object implementing x == y (class template)
equal_range	returns range of elements matching a specific key (function template)